firstly, the experimental phase current and input power data obtained from load test are employed to estimate the parameters in ii rated condition . then, the phase current and input power data in locked rotor condition are used to track the variation of the parameters of the secondary coil with slip frequency . the classical method and the direct modification method are also used to estimate the parameters of the induction machine in comparison with this technique 首先利用了負載試驗的定子電流和輸入功率數據來識別額定工況下的電機參數,然后又使用了堵轉時的定子電流、輸入功率數據來識別電機二次繞組參數隨轉差頻率的變化,并與傳統參數測試方法和直接修正參數法進行了比較。
to great extent the performance of field oriented control depends on the precise measurements of motor parameters . the initial values of motor parameters can be measured by the no-load and locked rotor tests . but some parameters will vary with the temperature rise and magnetic saturation, and they must be real time identified 矢量控制系統的性能很大程度上依賴于電機參數的準確測量,利用空載、堵轉實驗只能得到電機定轉子參數的初值,而電機的一些參數會隨著溫升和磁路飽和發生變化,需進行在線實時辨識。